Rockwell Automation 1771-IXHR , D17716.5.80 HIGH RESOL.THERMOCOUPLE - Manual (Page 7)

Using This Manual
Chapter 1
1Ć2
Chapter Topics Covered Title
Appendix A Specifications Your module's specifications
Appendix B Programming Examples
Appendix C Thermocouple Characteristics Extractions from NBS Monograph 125 (IPTS-68)
This manual contains warnings and cautions.
WARNING: A warning indicates where you may be injured if you
use your equipment improperly.
CAUTION: Cautions indicate where equipment may be damaged
from misuse.
You should read and understand cautions and warnings before performing the
procedures they precede.
You can install your input module in any system that uses Allen–Bradley
PLC–3 and PLC–5 programmable controllers with block transfer capability and
the 1771 I/O structure.
Contact your nearest Allen–Bradley office for more information about your
programmable controllers.
These input modules can be used with any 1771 I/O chassis. Communication
between the analog module and the processor is bidirectional. The processor
block–transfers output data through the output image table to the module and
block–transfers input data from the module through the input image table. The
module also requires an area in the data table to store the read block and write
block data. I/O image table use is an important factor in module placement and
addressing selection. The module’s data table use is listed in the following table.
Warnings and Cautions
Related Products
Product Compatibility