Rockwell Automation 1757-SWKIT400 Getting Started with ProcessLogix R400.0 Quick Start - Manual (Page 10)

10 Getting Started with ProcessLogix R400.0
Publication 1757-QS040A-EN-P - October 2001
3. Click OK to close the CPM Parameters dialog box.
4. To see your newly configured CPM and CEE, click the Project tab.
The CEE is listed under the CPM and is connected directly to it. This tells
you that the CEE is assigned to the CPM.
5. Load the CPM and the CEE:
a. In the project tab, click CPM0101.
b. From the Toolbar Menu, click the green down arrow.
The Load dialog box appears.
c. Verify the selected object is CPM0101, and click OK.
d. Click the Monitoring tab to verify that the loaded CPM and CEE can be
seen.
TIP
To see the CPM and CEE, you may need to expand the Root
branch of your tree by clicking the small “+” sign to the left of
the word Root.
TIP
Loading the CPM also loads the corresponding CEE. To see the
CPM and CEE in the Monitoring tab, you may need to expand
the Root branch of your tree by clicking the small “+” sign to
the left of the word Root. The CPM and the CEE should
appear blue.