Rockwell Automation 1757-SWKIT400 Getting Started with ProcessLogix R400.0 Quick Start - Manual (Page 11)

Getting Started with ProcessLogix R400.0 11
Publication 1757-QS040A-EN-P - October 2001
Configuring I/O Modules
Once you have created a controller, the next step is to configure the I/O modules
you will use in your system.
Before you can configure a module, you must add it from the library to your
project:
1. Click the Library tab.
2. Click the + to the left of the IO icon to see a list of available modules.
3. Create the I/O module blocks by dragging and dropping these modules, in
the order listed below, from the Library tab to the Project tab Root (on the
second tree display). You are prompted to change the I/O module name as
they are added.
Catalog Number Name
1756-IF6I LabAI
1756-OF6CI or
1756-OF6VI
LabAO
1756-IB16I LabDI
1756-OB16I LabDO