Rockwell Automation 1757-SWKIT400 Getting Started with ProcessLogix R400.0 Quick Start - Manual (Page 8)

8 Getting Started with ProcessLogix R400.0
Publication 1757-QS040A-EN-P - October 2001
2. Enter mngr (lowercase) for your User Name and mngr1 (lowercase) for your
Password, and click OK.
3. Control Builder starts up displaying the Project tab:
The available tabs are described in the following table:
Once you have opened Control Builder, you can begin configuring your hardware.
Creating a Controller
The first step in configuring your hardware is to create a controller.
1. In Control Builder, select File
⇒
New
⇒
Controllers
⇒
CPM-Control Processor
Module. You see the CPM Parameters dialog box (CPM = PLX52):
this tab: shows you:
Project the offline copy of your project
Monitoring the loaded or currently running copy of the application executing on the
1757-PLX52 Control Processor Module
Library • available I/O modules (IOM)
•
available function blocks for use in Control Modules
• available function blocks for use in Sequential Control Modules
•
available control component libraries (CCLs)