Rockwell Automation 1757-SWKIT400 Getting Started with ProcessLogix R400.0 Quick Start - Manual (Page 6)

6 Getting Started with ProcessLogix R400.0
Publication 1757-QS040A-EN-P - October 2001
Starting the ProcessLogix Server
The ProcessLogix Server program is the operating system for the ProcessLogix
Server. To start the Server:
1. Click Start
⇒
Programs
⇒
ProcessLogix Server
⇒
Start-Stop ProcessLogix Server
to call up the ProcessLogix Server dialog box. Check that the Server is
running.
OR
2. If the Server is running, close the dialog box. If the Server is not running:
a. With the Full Mode version of the dialog box active, click the System
Running option.
b. Click Yes to confirm the action and wait for the Server to change its state.
c. Close the ProcessLogix Server dialog box.
TIP
To display the “Full Mode” version of the ProcessLogix Server
dialog box, click the icon to the left of ProcessLogix in the
title bar and click Advanced
⇒
Full Mode. A checkmark will
now appear in front of the Full Mode selection to show that it
is active.