Rockwell Automation 1757-SWKIT400 Getting Started with ProcessLogix R400.0 Quick Start - Manual (Page 13)

Getting Started with ProcessLogix R400.0 13
Publication 1757-QS040A-EN-P - October 2001
Configuring analog output modules
To configure an analog output module:
1. Double-click the IOM named LabAO.
This brings up the window for the 6-channel isolated analog output module
(1756-OF6CI; current output, or 1756-OF6VI; voltage output).
2. On the IOM Configuration window, select the Main tab and enter the
following parameters:
3. Select the Channel Configuration tab and enter the following parameters for
all channels:
4. Click OK.
Configuring digital input modules
To configure a digital input module:
1. Double-click the IOM with the name LabDI.
This brings up the window for the 16-channel, 24V DC isolated analog input
module (1756-IB16I).
in this field: enter:
IOM Slot Number the slot number containing this module
Remote I/O Chassis Mac Address 0
ControlNet Modulel Slot Number 0
in this field: enter:
Shed to Safe Value unchecked
Calibration Bias 0