Rockwell Automation 1757-SWKIT400 Getting Started with ProcessLogix R400.0 Quick Start - Manual (Page 9)

Getting Started with ProcessLogix R400.0 9
Publication 1757-QS040A-EN-P - October 2001
2. In the CPM Parameters dialog box, select the following:
IMPORTANT
Be careful to enter the CPM Parameters correctly. You will not be
able to change them after they are entered.
in this field: enter/select:
CPM Name CPM0101
Network Type ControlNet
Driver Name AB_PCIC-1
Supervisory MAC Address 01 (for the ControlNet 1756-CNB card)
Supervisory Slot Number 00
CPM Slot Number 01
CEE Name CEE0101