Rockwell Automation 1758-RTU202 DataSite Hardware User Manual - Manual (Page 34)

Publication 1758-UM001D-EN-P - June 2011
34 Wiring the Controller
Wiring for Digital Output (DO)
The DO output is in the form of FET outputs. The FET output capacity is
24V DC @ 200 mA.
DO arrays are DO0…DO3 on the connecting terminal.
ATTENTION
If a high voltage or a large current is required, an interposing
relay should be connected.
DO0 DO1 DO2 DO3 DOV+ DOV-
LOAD LOAD LOAD
POWER SUPPL
Y
LOAD
11 12 13 14 15 16
12…24 V DC
44694