Rockwell Automation 1784-PM16SE SoftLogix Motion Card Setup and Configuration Manual - Manual (Page 198)

Publication 1784-UM003A-EN-P – June 2003
190 Creating & Configuring Your Coordinate System Tag
Cut/Paste
A Cut/Paste operation is used for moving the Coordinate System tag from
either a Motion Group Tag to the Ungrouped Axes folder or vice versa. When
a Cut/Paste operation is performed on a tag being moved from a Motion
Group tag to the Ungrouped Axes folder it unassigns the coordinate system
tag from the motion group. Likewise when it moves to the Motion Group tag
it becomes assigned to the Motion group tag.
Delete
Delete removes the Coordinate System tag from a Motion Group Tag or the
Ungrouped Axes folder. If a Motion Group is deleted, all coordinate system
tags associated with that motion group are unassigned and placed in the
Ungrouped Axes folder.