Rockwell Automation 1784-PM16SE SoftLogix Motion Card Setup and Configuration Manual - Manual (Page 84)

Publication 1784-UM003A-EN-P – June 2003
76 Configuring the1784-PM16SE Card
The data on this tab comes directly from the card. If you selected a
Listen-Only communication format when you created the card, this tab is not
available.
Figure 4.11 Module Properties - Module Info Tab
Identification
Displays the card’s:
• Vendor
• Product Type
• Product Code
• Revision Number
• Serial Number
• Product Name
The name displayed in the Product Name field is read from the card. This
name displays the series of the card.