Rockwell Automation 1784-PM16SE SoftLogix Motion Card Setup and Configuration Manual - Manual (Page 202)

Publication 1784-UM003A-EN-P – June 2003
194 Configuring a 1394x-SJTxx-D Digital Servo Drive
The module for a 1394x-SJTxx-D drive has 5 tabs:
Figure 8.5 Module Properties - General Tab
• General tab
• Connection tab
• Axes Association
• Power tab
• Module Info tab.
General Tab Use this tab to enter the module properties for 1394x-SJTxx-D digital servo
drive modules.
IMPORTANT
To create any one of the 1394x-SJT modules, the parent
module must be a 1784-PM16SE 16 Axis SERCOS
interface module.