Rockwell Automation 1784-PM16SE SoftLogix Motion Card Setup and Configuration Manual - Manual (Page 200)

Publication 1784-UM003A-EN-P – June 2003
192 Configuring a 1394x-SJTxx-D Digital Servo Drive
3. You can also right click on a selected 1784-PM16SE module and select
New Module from the pop up menu.
Figure 8.2 Right Click on 1784-PM16SE
4. In the Select Module Type dialog, select the desired 1394x-SJTxx-D
drive module.
Figure 8.3 Select Module Type Screen
5. Press the OK button to close the Select Module Type dialog. The
Module Properties wizard opens.