Rockwell Automation 1784-PM16SE SoftLogix Motion Card Setup and Configuration Manual - Manual (Page 73)

Publication 1784-UM003A-EN-P – June 2003
Configuring the1784-PM16SE Card 65
10. The SERCOS interface screen displays.
Figure 4.6 Module Properties Wizard Dialog - SERCOS interface Screen
11. On this screen you can enter the Data Rate, SERCOS ring Cycle time,
and the transmit power for the SERCOS ring.
The rest of the Create Wizard screens are only informational and do not
let you enter any information. It saves time if you click on the Finish>>
button at this time.
12. The 1784-PM16SE motion card appears in the I/O Configuration
branch of the Controller Organizer. It can now be put into use or edited
as you require.