Rockwell Automation Logix5000 Controllers Sequential Function Charts Programming Manual - Manual (Page 73)

Program a sequential function chart Chapter 2
If you the text box to Then
Stay in the same spot Stop. You are done.
Move with the element to which it applies Go to step 5.
5. Click the pin symbol in the text box and then click the SFC element to
which you want to attach the text box. A green dot shows a valid connection
point.
Show or hide text boxes or tag descriptions
You have the option of showing or hiding both text boxes and tag descriptions. If
you select to show descriptions, the SFC window only shows the descriptions for
steps, transitions, and stops (not actions).
1. From the Tools menu, select Options.
2. Under SFC Editor, select the Display category.
3. Select the check boxes for the features you want to appear on SFC windows.
Hide an individual tag description
Follow these steps to hide the description of a specific element while showing
other descriptions.
1. Click the button of the element whose description you want to hide.
Rockwell Automation Publication 1756-PM006F-EN-P - October 2014 73