Rockwell Automation 1790P-4R0 CompactBlock LDX I/O RTD/Resistance Input Module - Manual (Page 40)

Publication 1790-UM002A-EN-P
3-10 Module Data, Status, and Channel Configuration for DeviceNet
Configure DeviceNet
RTD/Resistance
Modules Using
RSNetWorx Following the steps below to configure 1790D-4R0/T4R0 RTD/resistance
modules.
1. Open RSNetWorx for DeviceNet.
2. Using the selections on the left of the window below, construct you
system. (If your network is up, just click on the Online Browse
button.)
Online Browse
Button