Rockwell Automation 1790P-4R0 CompactBlock LDX I/O RTD/Resistance Input Module User Manual
Page 64
Publication 1790-UM002A-EN-P
C-8 Module Configuration for PROFIBUS
5. Load the configuration to the Master through one of the following
methods.
•
Right click on the Master and select Load Configuration from the
menu.
Or,
•
Select the Load configuration icon in the toolbar.
If the scanner is online, the following message displays:
Card is online. Do you want to load configuration.
•
Select Yes to load your new configuration.
You may receive this message:
This is only a warning that if your Min Cycle Time is not twice as long
as the Scan Time then you may lose serial communications. This
message can usually be ignored unless you require online monitoring.
The Master status now changes to the Configured Program Mode.
Your scanner is now configured and ready.
6. Turn the processor to Run mode.