Rockwell Automation 1790P-4R0 CompactBlock LDX I/O RTD/Resistance Input Module - Manual (Page 61)

Publication 1790-UM002A-EN-P
Module Configuration for PROFIBUS C-5
9. Click the Ext. Prms tab.
This is where the parameters that can be set for the slave RTD/
resistance module are configured.
Module configuration parameters include watchdog time base,
temperature units, filter frequency, and input RTD/resistance type.
The 1790P-T4R0
module produces 5
words of data.
The produced 5
words will appear
in the processor
input data table.
On this screen, you
see all the
parameters for the
module. These
include watchdog
time, temperature
units, filter
frequency, and
input RTD/
resistance type.
Select the watchdog
time base (10 ms or
1 ms).