Rockwell Automation 1790P-4R0 CompactBlock LDX I/O RTD/Resistance Input Module - Manual (Page 41)

Publication 1790-UM002A-EN-P
Module Data, Status, and Channel Configuration for DeviceNet 3-11
3. After setting up your system, double-click on the module you want to
configure. (If you are online, upload the configuration and existing
parameters from the module display.) A window similar to the
following appears.
RTD/resistance modules will have parameters similar to the following.
Click the device
Parameters tab to
display the screen in
which you can set
parameters.
If you see a lock next to
an entry, this indicates
that you cannot change
that parameter.
On this screen, you see all the parameters for the module. These include Autobaud,
RTD Input value, combined temperature units/filter frequency, module status and
Input RTD/resistance type.