Rockwell Automation 1756-Lx_Mx ControlLogix Controller and Memory Board Installation Instructions User Manual
Page 19
Advertising
![background image](/manuals/579964/19/background.png)
ControlLogix Controller and Memory Board 19
Publication
1756-IN101L-EN-P - June 2008
Remove the Existing Memory Board
If the controller does not already have a memory board, as shown in the
figure, refer to the
Install the Memory Board
section.
1. Pull the plastic back edge of the controller out slightly to clear the tabs
on the memory board.
2. Gently separate and remove the memory board from the controller.
42527
42526
Advertising