Rockwell Automation 1756-Lx_Mx ControlLogix Controller and Memory Board Installation Instructions - Manual (Page 24)

24 ControlLogix Controller and Memory Board
Publication 1756-IN101L-EN-P - June 2008
Remove a CompactFlash Card from a Series B Controller
1. If the OK status indicator is flashing green, wait until it turns solid
green.
2. Open the door of the controller.
3. Push and hold the CompactFlash latch to the left.
4. Push the eject button and remove the card.
5. Release the latch.
WARNING
When you insert or remove the CompactFlash card an electrical arc
can occur. This could cause an explosion in hazardous location
installations. Be sure that power is removed or the area is
nonhazardous before proceeding.
RS232
BATTERY
PORT
1-DCD
2-RXD
4-DTR
3-TXD
5-GND
DSR-6
CTS-8
RTS-7
N/C-9
1
2
BATTERY DATE
UP
COMPACT FLASH
2
To
Insert 1
To Eject
1 + 2 2
1
1