Rockwell Automation 1756-Lx_Mx ControlLogix Controller and Memory Board Installation Instructions User Manual
Page 26
Advertising
26 ControlLogix Controller and Memory Board
Publication
1756-IN101L-EN-P - June 2008
Install a Battery in a Series A Controller
1. Insert and connect the battery as shown.
2. Write the date on the battery label.
3. Attach the label to the inside of the controller door.
ATTENTION
For a series A controller, connect only a 1756-BA1 battery or a 1756-BATM
battery module. Other batteries may damage the controller.
Top
No Connection
Middle
Black Lead (-)
Bottom
Red Lead (+)
DATE
Advertising