Rockwell Automation 1756-Lx_Mx ControlLogix Controller and Memory Board Installation Instructions - Manual (Page 40)

40 ControlLogix Controller and Memory Board
Publication 1756-IN101L-EN-P - June 2008
Choosing the Operating Mode of the Controllers
IMPORTANT
• All modes send and receive data in response to a message from
another controller.
• All modes produce and consume tags.
No
Do you want to prevent
RSLogix 5000 software from
changing the mode?
Do you want to execute the
logic in the controller?
Do you want the logic to
control the output devices?
Turn the keyswitch to
PROG and then to REM
(Remote Program mode).
Turn the
keyswitch to
PROG (Program
mode).
Turn the keyswitch to RUN
and then to REM
(Remote Run mode).
No
Yes
Do you want to prevent
RSLogix 5000 software from:
• changing the mode
• downloading a project
• performing online edits
Turn the keyswitch to RUN
(Run mode).
No
Yes
Do you need to schedule a
ControlNet network?
No
Yes
Outputs revert to their configured
state for Program mode. A
This includes Message (MSG) instructions. B
No
1. Turn the keyswitch to REM.
2. Go online with
RSLogix 5000 software and
choose Test mode.
Yes
B
A
A
A
Yes