Rockwell Automation 1756-Lx_Mx ControlLogix Controller and Memory Board Installation Instructions - Manual (Page 20)

20 ControlLogix Controller and Memory Board
Publication 1756-IN101L-EN-P - June 2008
Install the Memory Board
1. Place the memory board over the connector and slide the memory
board into the controller.
2. Pull the plastic back edge of the controller out slightly to clear the tabs
of the memory board.
3. Line up the connectors.
4. Place your hands on the boards over the connectors and gently
squeeze them together.
5. Make sure that the tabs on the memory board extend through the
slots on the plastic housing of the controller.
40018
2
3
3
1
1
Item Description
1 Tab
2 Memory board
3 Slot