Rockwell Automation 2711P Creating Modbus Applications - Manual (Page 10)

Publication 2711P-UM002B-EN-P - March 2007
10 Installing Software
Install KEPServer
Enterprise KEPServer Enterprise is used to:
• configure the KEPServer driver
• create tags
• test communications on the desktop.
KEPServer Enterprise is included with RSView Studio and can be
installed from:
• a CD or
• downloaded from the Rockwell Software web site at
www.software.rockwell.com.
KEPServer runs as a service and an icon will display in the toolbar.
The software can be installed by running the setup.exe file from the
CD or downloaded version.
Firmware Upgrade Wizard The Firmware Upgrade Wizard is used to install KEPServer drivers and
upgrade firmware in the following devices:
• PanelView Plus
• PanelView Plus CE
The Firmware Upgrade Wizard is installed automatically with RSView
Studio.
The Firmware Upgrade (FUP) files with the KEPServer drivers is
available at http://support.rockwellautomation.com under
Downloads.
IMPORTANT
A current registered serial number is required to download
software from the Rockwell Software website.
IMPORTANT
When installing KEPServer Enterprise, be sure to select the
Modbus drivers if you are not doing a full install.