Rockwell Automation 2711P Creating Modbus Applications - Manual (Page 8)

Publication 2711P-UM002B-EN-P - March 2007
8
• Chapter 7 Compiling, Downloading, and Running Application -
Shows how to compile a runtime .mer file, connect your
PanelView Plus/PanelView Plus CE terminal to a Modbus
network, download the .mer file to the terminal, and run the
application.
• Chapter 8 Troubleshooting - Covers common error types that
occur during runtime and how you can correct these errors.
Software Requirements The following software must be installed on the development
desktop:
• RSView Studio 3.0, or later
• KEPServer Enterprise software
• Firmware Upgrade Wizard
Additional Resources You might want to consult the following sources for additional
information:
• KEPServer Enterprise Software online help
• RSView Enterprise or RSView Studio online help
• PanelView Plus User Manual, publication no. 2711P-UM001
An electronic version of the PanelView Plus user manual is
available at:
http://literature.rockwellautomation.com