Rockwell Automation 2711P Creating Modbus Applications - Manual (Page 9)

9 Publication 2711P-UM002B-EN-P - March 2007
Chapter
1
Installing Software
Objectives To develop RSView ME applications, configure KEPServer drivers, and
use these drivers with applications that run on PanelView
Plus/PanelView Plus CE terminals, the following software must be
loaded on your development computer:
• RSView Studio for ME or RSView Enterprise
• KEPServer Enterprise
• Firmware Upgrade Wizard
Refer to the installation information provided with RSView Studio and
KEPServer Enterprise for the latest details on installation requirements.
Install RSView Studio RSView Studio Enterprise or RSView Studio for Machine Edition
software is installed from:
• a CD or
• downloaded from the Rockwell Software website at
www.software.rockwell.com.
The installation menu with instructions will appear when inserting the
CD into a computer or you can run setup.exe from the root directory.
IMPORTANT
A current registered serial number is required to download
software from the Rockwell Software website.