Rockwell Automation 2711P Creating Modbus Applications User Manual
Page 38
Advertising
Publication 2711P-UM002B-EN-P - March 2007
38 Making KEPServer Drivers and Tags Available in RSView Studio
5. Select KEPServerEnterprise and click OK.
6. Enter a name for the KEPServer driver and click OK.
Informational messages appear at the bottom of your RSView
Studio window indicating that the Server has started and is
available on the computer.
Any tags created earlier in the KEPServer software are now available
for the HMI using the standard RSView Studio tag browser.
TIP
Remove all serial drivers from the RSLinx Enterprise
Communication Setup that would conflict with the port
configured for Modbus.
Advertising