3 - configuring kepserver drivers for modbus, Objectives, Create a project file – Rockwell Automation 2711P Creating Modbus Applications User Manual
Page 15: Chapter 3, Configuring kepserver drivers for modbus, Objectives create a project file
Advertising
![background image](/manuals/580200/15/background.png)
15
Publication 2711P-UM002B-EN-P - March 2007
Chapter
3
Configuring KEPServer Drivers for Modbus
Objectives
This chapter shows how to use KEPServer Enterprise software to
configure KEPServer drivers for Modbus protocols including Ethernet
TCP/IP, RTU Serial, Unsolicited Serial, and ASCII Serial. You will:
• create a project (.pfe) for the drivers
• set the project file as the default project
For each Modbus driver in your project file, you will:
• add a channel
• add a device (or controller)
• create tags
Create a Project File
The first thing you need to do is create a project file.
1. Double-click the KEPServer Enterprise icon in the Systray to
open the default project window below.
Advertising