Rockwell Automation 2711P Creating Modbus Applications - Manual (Page 44)

Publication 2711P-UM002B-EN-P - March 2007
44 Installing KEPServer Drivers on Terminal
5. Select Finish to copy the firmware source files to the location
specified in step 2.
2. Upgrade Firmware in Terminal using Firmware Upgrade Card
1. Insert the compact flash card into the card slot of a powered
PanelView Plus terminal. A dialog appears indicating the
firmware upgrade is about to occur.
2. Press Upgrade to begin the firmware upgrade.
TIP
If the files were created in a separate folder on a local
hard drive, copy the files to the root directory of the
compact flash card.
IMPORTANT
Do NOT remove the compact flash card while the upgrade is in
process.