Rockwell Automation 2711P Creating Modbus Applications - Manual (Page 47)

Publication 2711P-UM002B-EN-P - March 2007
Installing KEPServer Drivers on Terminal 47
2. Select Upgrade firmware on terminal and press OK.
3. Select Network connection and press Next.
Use the Ethernet and Serial connections only if the firmware
upgrade is unsuccessful.
4. Locate the PanelView Plus terminal on your Ethernet network
via its IP address.
Skip to Step 6 if you found the terminal. If you do not see the
terminal, right click on the Ethernet driver and add the device to
the browse tree.