Rockwell Automation 2711P Creating Modbus Applications - Manual (Page 43)

Publication 2711P-UM002B-EN-P - March 2007
Installing KEPServer Drivers on Terminal 43
3. From the Firmware source folder list, select the location of the
firmware files. The default location is C:\Program
Files\Rockwell Software\RSView Enterprise\FUPs.
From the Upgrade firmware version list, select the version of the
firmware you want to upgrade to, then press Next.
4. Select the appropriate KEPServer drivers and press Next. If the
selected FUP file does not support the KEPServer drivers, this
dialog will not appear.
IMPORTANT
Each driver consumes 150Kbytes to 250Kbytes of disk-on-chip
memory space. Only install drivers to be used on the Windows
CE terminals. You can always add others drivers later if needed.