Operating the crimp tool, Switch on, Switch off – Rockwell Automation 2090-Series Circular-DIN Connector Kits, Flange Kits, and Crimp Tools User Manual
Page 13: Power saving, Changing the mode display
Advertising
Rockwell Automation Publication 2090-IN042A-EN-P - May 2011
13
Operating the Crimp Tool
Switch On
Press the On push button, or turn the adjustment wheel in any direction. The
digital display appears in standard (mm).
Switch Off
When the digital display is on, press the On push button to switch the digital
display off.
Power Saving
The digital display automatically switches off after one minute of non-operation.
Changing the Mode Display
Display modes are listed in the flow chart below. Press the Mode push button
with the 2 mm calibration gauge to advance to the next setting.
Back to Default Display
Standard Metric Display
(mm)
US/Imperial Display
(inch)
MIL Selector Positions
(Eight positions per MIL-22520)
Advertising