Rockwell Automation 2090-Series Circular-DIN Connector Kits, Flange Kits, and Crimp Tools - Manual (Page 4)

Rockwell Automation Publication 2090-IN042A-EN-P - May 2011
4
Catalog Number
Descriptions Catalog numbers and descriptions for the 2090-series circular-DIN connector
kits, flange kits, and crimp tools are listed in the table below.
ATTENTION: The examples in this publication show all the available
connections, some of which may not be appropriate for your specific
installation. Refer to your drive installation or user manual for
recommended wire trim lengths, and wiring examples appropriate to your
drive and motor application.
Do not connect unused wires. Unused wires may be trimmed and finished as
necessary to prevent accidental contact with other wires and wire shields, or
with a ground connection.
Cat. No. Description Plug, Extension, and Flange Type
2090-TCR47-M40 Hand crimp tool
2090-TCR47-M23 8-point indenter crimp tool with digital display
2090-KFBM4-CAAA Threaded feedback plug Type 623 plug (solder version)
2090-KFBM7-CAAA SpeedTec feedback plug
2090-KPBM4-12AA Threaded power plug Type 923 plug (9-pin, crimp version)
2090-KPBM7-12AA SpeedTec power plug
2090-KPBM4-06AA Threaded power plug Type 940 plug (8-pin, crimp version)
2090-KPBM7-06AA SpeedTec power plug
2090-KFBE7-CAAA SpeedTec compatible feedback receptacle Type 623 extension (solder version)
2090-KPBE7-12AA SpeedTec compatible power receptacle Type 923 extension (9-pin, crimp version)
2090-KPBE7-06AA SpeedTec compatible power receptacle Type 940 extension (8-pin, crimp version)
2090-KFB47-CF Cable flange for (threaded and SpeedTec) feedback connector Two-part flange (hinged, metal version, CF)
2090-KPB47-12CF Cable flange for (threaded and SpeedTec) power connectors Two-part flange (hinged, metal version, 12CF)
2090-KPB47-06CF Cable flange for (threaded and SpeedTec) power connector Two-part flange (hinged, metal version, 06CF)