Rockwell Automation 9399 A.I. SERIES INSTALLATION GUIDE - Manual (Page 17)

Installation Guide
1-14
4. Setup asks for the name of the directory where you originally installed the A.I.
Series software. Either accept the default directory by pressing [Enter], or edit the
directory name appropriately. When you are finished editing, press [Enter].
•
If the directory name you entered does not exist, you will be prompted to allow
the Setup program to create the directory for you. Press Y [Enter] to update
the files in the selected directory. Type N [Enter] to return to the beginning of
this step.
•
After entering the directory name, you will be prompted to confirm the update.
Type: Y [Enter] to update the files in the selected directory. Type: N [Enter]
to return to the beginning of this step.
5. The Setup program uncompresses the archived files from your A.I. Series software
disk(s), and copies them into the desired directory.
Note When switching disks, make certain that you have NOT write protected any of the
disks! (See the note on page 1-4 if you need help distinguishing a write protected
disk.)