Rockwell Automation 9399 A.I. SERIES INSTALLATION GUIDE User Manual
Page 9
Installation Guide
1-6
To install the software on more than one computer, perform a full install on the
primary system. Then use the Setup program's Update option to transfer the executable
files to the secondary system. You then have three options for running the software on
these two systems:
•
Move the activation files from one system to the other as needed.
•
Move the activation files to a blank, formatted floppy disk and use that disk as a
key disk for both systems.
•
Use the Master disk as a key disk to run the software. (You do not need to move
the activation file back to the Master disk.) This is the least favorable solution,
however, as your Master disk could be damaged!
See Moving Activation Files on page 2-9 for directions on moving activation files.