Rockwell Automation 9399 A.I. SERIES INSTALLATION GUIDE - Manual (Page 43)

Installation Guide
2-16
4. EvMove is asking you to select the drive you are moving the activation file from,
and the drive to which you want it moved. Use the drop-down list boxes to set the
drive letters, then click the OK button.
5. EvMove displays an EvMove dialog box similar to the one shown below.
This dialog box shows the activation files on the source and destination drives you
selected (the lists on your screen will look different). EvMove determines the
number of installs to move as shown in the table below.
If the destination drive is… EvMove sets the default value for Moving to…
a remote (network) drive all installs available for all products on the source
drive
a Master disk all installs available for the product serial number
on the Master disk
a local non-Master disk one install for all products on the source drive