9399-aiig, inside front cover – Rockwell Automation 9399 A.I. SERIES INSTALLATION GUIDE User Manual
Page 2
Installation Guide
ii
Copyright Notice
1995 Rockwell Software Inc. All rights reserved
Printed in the United States of America
Portions copyrighted by Allen-Bradley Company, Inc. and used with permission.
This manual and any accompanying Rockwell Software products are copyrighted by Rockwell
Software Inc. Any reproduction and/or distribution without prior written consent from Rockwell
Software Inc. is strictly prohibited. Please refer to the license agreement for details.
Trademark Notices
WINtelligent Series is a registered trademark and the Rockwell Software logo, AdvanceDDE,
ControlView, INTERCHANGE, Packed DDE, WINtelligent, WINtelligent EMULATE 5,
WINtelligent EMULATE 500, WINtelligent LINX, WINtelligent LOGIC 5, WINtelligent TREND,
and WINtelligent VIEW are trademarks of Rockwell Software Inc.
PLC, PLC-2, PLC-3 and PLC-5, are registered trademarks, and Data Highway Plus, DH+, DHII,
DTL, Network DTL, Pyramid Integrator, SLC, and SLC 500 are trademarks of the Allen-Bradley
Company, Inc.
Microsoft, MS-DOS, Windows, Microsoft Access and Visual Basic are registered trademarks, and
Windows NT is a trademark of the Microsoft Corporation.
All other trademarks are the property of their respective holders and are hereby acknowledged.
Important User
Information
This Rockwell Software product is warranted in accord with the product license. The product's
performance will be affected by system configuration, the application being performed, operator
control and other related factors.
The product's implementation may vary among users.
This manual is as up-to-date as possible at the time of printing; however, the accompanying software
may have changed since that time. Rockwell Software reserves the right to change any information
contained in this manual or the software at anytime without prior notice.
The instructions in this manual do not claim to cover all the details or variations in the equipment,
procedure, or process described, nor to provide directions for meeting every possible contingency
during installation, operation, or maintenance.