Rockwell Automation 9399 A.I. SERIES INSTALLATION GUIDE - Manual (Page 37)

Installation Guide
2-10
DOS Mode
To move the A.I. Series software:
1. Insert the Setup disk into your floppy drive.
2. Start the Setup program either from DOS or a DOS box under Windows.
•
Type: A:[Enter]
•
Type: SETUP [Enter]
You will see a screen like the following.
3. Select the MOVE option.
•
Type: M
•
When prompted to confirm, type Y [Enter] to move the A.I. Series software
and display the next screen. Type N [Enter] to return to the beginning of this
step.