Rockwell Automation 9399 A.I. SERIES INSTALLATION GUIDE - Manual (Page 38)

Copy Protection
2-11
A window will appear listing the packages you can move.
4. Type Y in the field to the right of each module you want to move. When you reach
the bottom of the screen, type Y and press [Enter].
Note The Emulation module is an added-cost option. Do not attempt to move Emulation
unless you have an Emulation Master disk.
5. Another window will appear, asking for the hard disk drive letter that the
activation files are to be moved to (the default is C) and the floppy disk drive letter
where the Master disk is inserted (the default is A).
•
Either press [Enter] to accept the defaults or type in the appropriate drive
letters.
6. You will be asked to verify your selections.
•
Press: Y [Enter]
7. Following the prompts on the screen, insert the Master disks as they are requested.