Rockwell Automation WebPak CS Software Version 1.0 - Manual (Page 31)

Monitoring and Editing Drive Parameters 5-3
5.2 Adding Parameters to the Monitor List
You can add up to 20 parameters to the Monitor List. When you select Add, the Add
Parameters to Monitor List dialog box is displayed. The Sort By options let you display
the parameters by parameter number or by description (alphabetically). Figure 5.2
shows a sample Add Parameters to Monitor List dialog box.
To add parameters, follow these steps:
Step 1. Use the scroll bar or the arrow keys to move up and down the list of
parameters.
Step 2. Use the mouse or the spacebar to select the parameters you want to monitor.
You can select multiple parameters before choosing Add. You can select a
total of 20 parameters.
Step 3. Do one of the following:
• To add the parameters to the monitor list and continue to display the
dialog box, select Add.
• To add the parameters and return to the monitor window, select OK.
5.3 Removing Parameters from the Monitor List
To delete parameters from the Monitor List, follow these steps:
Step 1. Select the parameter you want to remove from the list.
Step 2. Click on the Remove button.
Important: You can clear all the parameters from a Monitor List by selecting Clear.
Figure 5.2 – Add Parameters to Monitor List Dialog Box