Rockwell Automation WebPak CS Software Version 1.0 - Manual (Page 39)

Monitoring Drive Status and Alarms 6-3
6.2 Restoring Default Values to Drive Parameters
You can restore the default values to all of the drive parameters that have defaults. To
do this:
• From the Drive menu, choose Restore defaults.
6.3 Saving Drive Parameter Values to Non-Volatile
Memory on the Drive
You can save the values of the drive parameters in the drive’s runtime memory to non-
volatile memory on the drive. To do this:
• From the Drive menu, choose Memory save.
6.4 Restoring Drive Parameter Values from Non-Volatile
Memory in the Drive
You can write the values stored by the Memory save command from non-volatile
memory on the drive into the drive’s runtime memory. To do this:
• From the Drive menu, choose Memory restore.