Rockwell Automation WebPak CS Software Version 1.0 - Manual (Page 34)

5-6 WebPakCS Software V1.0
5.5 Saving a Monitor List
The Save command creates a file containing the list of parameter numbers you have
displayed in the parameter monitor. When you select Save, the Save Monitor List
dialog box is displayed as shown in figure 5.3.
To save a monitor list file, follow these steps:
Step 1. Select the drive and directory for the monitor list file.
Step 2. Enter a file name. The file name should include the extension .MON.
Step 3. Save the monitor list by selecting OK, or select Cancel to exit the dialog box
without saving.
Figure 5.3 – Save Monitor List Dialog Box