Rockwell Automation Logix5000 Control Systems: Connect PowerFlex 70 Drives over EtherNet/IP Quick Start - Manual (Page 24)

24 Rockwell Automation Publication IASIMP-QS031A-EN-P - February 2012
Chapter 2 Add a PowerFlex 70 Drive to an RSLogix 5000 Project
4. Enter a name for the drive.
5. Enter the same IP address for the
20A-B4P2A0AYNNNC0 drive as
the IP address you assigned to the
EtherNet/IP adapter in
Configure
the EtherNet/IP Adapter on
page 18
.
6. Click Change.
7. On the Module Definition dialog
box, complete the following tasks.
a. Select Disable Keying.
b. Select the Drive Rating that
matches the PowerFlex 70 drive.
c. Click Match Drive.
8. On the Full or Partial Match
dialog box, clear Include I/O and
click Partial.