Rockwell Automation Logix5000 Control Systems: Connect PowerFlex 70 Drives over EtherNet/IP Quick Start User Manual
Page 26
Advertising
26
Rockwell Automation Publication IASIMP-QS031A-EN-P - February 2012
Chapter 2 Add a PowerFlex 70 Drive to an RSLogix 5000 Project
13.
Click the Connection tab.
14.
Clear Use Unicast Connection
over EtherNet/IP and click OK.
15.
Click Close on the Select Module
Type dialog box.
The PowerFlex 70 is added to the
controller organizer under the
network port.
16.
Save the project.
Advertising