Rockwell Automation Logix5000 Control Systems: Connect PowerFlex 70 Drives over EtherNet/IP Quick Start - Manual (Page 30)

30 Rockwell Automation Publication IASIMP-QS031A-EN-P - February 2012
Chapter 2 Add a PowerFlex 70 Drive to an RSLogix 5000 Project
Edit the 20A-B4P2A0AYNNNC0 Drive Parameters
1. On the Drive tab, double-click
Parameter List.
The Parameter List dialog box
appears.
2. To change drive parameters, click
the Value column cell for the
parameter and make a change.
Some Value cells use pull-down
menus and others allow you to
type a different value.