Rockwell Automation Logix5000 Control Systems: Connect PowerFlex 70 Drives over EtherNet/IP Quick Start - Manual (Page 7)

Rockwell Automation Publication IASIMP-QS031A-EN-P - February 2012 7
Preface
Configure the
networks Complete required tasks associated with the networks used in your application, such as assigning an IP address
to the controller’s communication port or communication module in your Logix5000 control system.
Create an
RSLogix 5000 project Project stored used with your Logix5000 controller that includes all desired control system components and
necessary programming, for example, adding ladder logic to test tasks associated with individual system
components.
Table 1 - Required Tasks to Complete Before Using this Quick Start
Task Description