Rockwell Automation Logix5000 Control Systems: Connect PowerFlex 70 Drives over EtherNet/IP Quick Start - Manual (Page 34)

34 Rockwell Automation Publication IASIMP-QS031A-EN-P - February 2012
Chapter 2 Add a PowerFlex 70 Drive to an RSLogix 5000 Project
10. Change the Stop tag back to 0.
11. Go Offline.
By starting and stopping the drive, you
verified the following conditions exist in
your application:
• The controller is correctly
communicating with the drive.
• The drive can receive simple commands.
Additional Resources
For a list of additional resources that might assist you when adding the
20A-B4P2A0AYNNNC0 drive to an RSLogix 5000 project, see
page 11 .