Rockwell Automation Logix5000 Control Systems: Connect PowerFlex 70 Drives over EtherNet/IP Quick Start - Manual (Page 27)

Rockwell Automation Publication IASIMP-QS031A-EN-P - February 2012 27
Add a PowerFlex 70 Drive to an RSLogix 5000 Project Chapter 2
Download the Project
1. Click the Controller Status icon
and choose Download.
2. Click Download.
The project downloads to the
controller.
3. Put the controller mode switch in
the REM position and change the
RSLogix 5000 project to Remote
Run mode.
IMPORTANT If you receive a fault message on your
PowerFlex 70 drive, press on
the keypad to clear the fault.