Rockwell Automation Logix5000 Control Systems: Connect PowerFlex 70 Drives over EtherNet/IP Quick Start User Manual
Page 25
Advertising
Rockwell Automation Publication IASIMP-QS031A-EN-P - February 2012
25
Add a PowerFlex 70 Drive to an RSLogix 5000 Project Chapter 2
9.
On the Connect to Drive dialog
box, navigate to the drive.
10.
Select the drive and click OK.
The software shows a Creating
Device Database File dialog box
that tracks the progress of the
function.
No action is necessary.
11.
Click OK when a dialog box
appears alerting you that the
match to the online drive was
successful.
12.
When the Module Definition
dialog box appears, click OK.
IMPORTANT
If your computer already has a
database on it, the software
will not create a new one.
Advertising