Rockwell Automation Logix5000 Control Systems: Connect PowerFlex 70 Drives over EtherNet/IP Quick Start - Manual (Page 28)

28 Rockwell Automation Publication IASIMP-QS031A-EN-P - February 2012
Chapter 2 Add a PowerFlex 70 Drive to an RSLogix 5000 Project
Connect to the 20A-B4P2A0AYNNNC0 Drive
Complete these steps to connect to the 20A-B4P2A0AYNNNC0 drive.
1. Right-click the 20A-
B4P2A0AYNNNC0 drive and
choose Properties.
2. Click the Drive tab and click
Connect to Drive.
3. Select the 20A-
B4P2A0AYNNNC0 drive and
click OK.
If there are differences between the
project and the drive,
RSLogix 5000 software alerts you.